Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Toyota >> 2009 >> Land Cruiser >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Brake Control/Dynamic Control System >> Crawl Switch >> Inspection

Crawl Switch: Inspection

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. INSPECT CRAWL SWITCH 
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance 

      STANDARD RESISTANCE SPECIFICATION

      Tester Connection Switch Condition Specified Condition
      3 (ECU1) - 20 (E) Speed selector: MID 10 kΩ or higher
      Speed selector: HI
      Speed selector: LO Below 1 Ω
      4 (ECU2) - 20 (E) Speed selector: MID 10 kΩ or higher
      Speed selector: HI Below 1 Ω
      Speed selector: LO
      2 (HSW) - 20 (E) ON/OFF: Pressed Below 1 Ω
      ON/OFF: Not pressed 10 kΩ or higher

      If the result is not as specified, replace the suspension control switch (CRAWL switch).

    Fig 1: Identifying Crawl Switch Connector
    G05630001Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002