Oil Level Sensor: Inspection

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

INSPECT ENGINE OIL LEVEL SENSOR

Partially immerse the sensor in an oil bath and warm up the oil bath.

Measure the resistance according to the value(s) in the table below.

Standard Resistance

STANDARD RESISTANCE SPECIFICATION

Tester Connection	Condition	Specified Condition
1-2	ON, 20°C (68°F)	Below 1 Ω
	OFF, 20°C (68°F)
	ON, 60°C (140°F)
	OFF, 60°C (140°F)	10 kΩ or higher

If the result is not as specified, replace the sensor.

Fig 1: Inspecting Engine Oil Level Sensor Connector

G05638156

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002