Stabilizer Control Valve: Disassembly

REMOVE SERVICE VALVE CAP (for Lower Chamber Side)
1. Remove the cap from the adapter housing.
REMOVE SERVICE VALVE CAP (for Upper Chamber Side)
HINT:

Use the same procedures described for the lower chamber side.

Fig 1: Identifying Service Valve Cap
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE OIL NOZZLE VALVE SUB-ASSEMBLY (for Lower Chamber Side)
1. Remove the oil nozzle valve from the adapter housing.
REMOVE OIL NOZZLE VALVE SUB-ASSEMBLY (for Upper Chamber Side)
HINT:

Use the same procedures described for the lower chamber side.

Fig 2: Identifying Oil Nozzle Valve
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE STABILIZER CONTROL ADAPTER SHUTTER VALVE (for Lower Chamber Side)
1. Remove the shutter valve and O-ring from the adapter housing.
REMOVE STABILIZER CONTROL ADAPTER SHUTTER VALVE (for Upper Chamber Side)
HINT:

Use the same procedures described for the lower chamber side.

Fig 3: Identifying Stabilizer Control Adapter Shutter Valve (Upper Chamber Side)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002