Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Toyota >> 2009 >> Matrix Base, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control System (2ZR-FE) >> SFI System >> DTC P060A Internal Control Module Monitoring Processor Performance >> Inspection Procedure

Inspection Procedure

Download the full database via torrent (~1.1 TB)
  1. READ OUTPUT DTC (DTC P060A) 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Clear DTCs (See DTC CHECK / CLEAR ).
    5. Turn the ignition switch off and turn the Techstream off.
    6. Disconnect the Techstream.
    7. Disconnect the cable from the battery negative (-) terminal and wait for 1 minute.
    8. Connect the cable to the battery negative (-) terminal.
    9. Connect the Techstream to the DLC3.
    10. Turn the ignition switch to ON.
    11. Turn the Techstream on.
    12. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
    13. Read the DTCs.

      Result 

      RESULT CHART

      Result Proceed to
      DTC is not output A
      DTC P060A is output B

      B: REPLACE ECM  (See REMOVAL )

      A: CHECK FOR INTERMITTENT PROBLEMS  (See CHECK FOR INTERMITTENT PROBLEMS )

scientia non olet · About Brad's Car Manuals