Front Speed Sensor: Removal

HINT:

Remove the RH side by same procedures with LH side.

1. REMOVE FRONT WHEEL 
2. REMOVE FRONT FENDER LINER LH 
3. REMOVE FRONT SPEED SENSOR LH 
   1. Disconnect the speed sensor connector.
   2. Remove the sensor harness and clamp from the body.
      Fig 1: Connecting Speed Sensor Connector

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   3. Remove the 2 clamp bolts holding the sensor harness and clamp from the body and shock absorber.
      Fig 2: Locating Clamp Bolts

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   4. Remove the bolt and speed sensor front LH.
      NOTE: Keep the tip of the speed sensor front LH.
   Fig 3: Locating Front Speed Sensor Bolt LH
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002