Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Volkswagen >> 1986 >> Vanagon Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - BOSCH AFC >> Testing >> Idle Stabilizer >> 2nd Check

2nd Check

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. With engine at operating temperature and electrical system off, check for leaks in intake air system. Check ignition timing and idle RPM.
  2. Remove crankcase breather hose and close tightly. Connect Tester (VW 1315 A/1) with Adapter (VW 1315A/2) to idle stabilizer valve.
  3. With engine at idle, nominal value should be about 440 mA (fluctuating). Disconnect connector for oxygen sensor. Nominal value should about 430 mA (constant). If nominal values are not met, replace stabilizer control unit.
CAUTION: DO NOT connect test light to throttle valve switch connectors if ECU is connected.