Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Volkswagen >> 1988 >> GTI >> Repair and Diagnosis >> Engine Performance >> System >> DIGIFANT CEC System >> Testing >> Idle Stabilizer >> Operation

Idle Stabilizer: Operation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Turn ignition switch on. Idle stabilizer should vibrate and hum. If stabilizer does not operate, disconnect connector from idle stabilizer. Using Tester (VW 1325 A-1 ), check for continuity. Continuity should exist.
  2. Replace idle stabilizer if no continuity exists. If continuity is obtained, reconnect connector to valve. Check electrical connections on control unit relay adapter located in front of right taillight.
  3. Replace idle stabilizer control unit if electrical connections are okay.
scientia non olet · About Brad's Car Manuals