Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Volkswagen >> 1990 >> Vanagon Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Ignition Control Unit >> Ignition Control Unit (VANAGON)

Ignition Control Unit (VANAGON)

Download the full database via torrent (~1.1 TB)
  1. Turn ignition off. Attach DVOM to ignition coil primary terminals. Disconnect Hall Effect sender wire harness connector from distributor. Turn ignition on.
  2. While observing DVOM reading, attach center terminal of connector to ground for 3 seconds. Voltage reading should briefly increase to 4.5 volts. If voltage reading did not increase, check wiring for short or open circuit. If wiring is okay, replace ignition control unit.
scientia non olet · About Brad's Car Manuals