Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Volvo >> 2000 >> S70 GLT >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Control - Removal, Overhaul & Installation >> Computerized Engine Controls >> Engine Control Module >> Installation

Engine Control Module: Installation

Download the full database via torrent (~1.1 TB)
  1. Inspect pins and sockets of control module connectors before installing. If any are visibly damaged, control module must be replaced.
  2. Carefully place control module into its housing. Press module into grooves as far as it will go.
  3. Place Special Tool (999 5572) or equivalent puller around control module. Move upper section of puller as far forward as it will go. See Figure.
  4. Press cover of control module housing into place.
  5. Ensure correct positioning of air ducts around module housing.
scientia non olet · About Brad's Car Manuals