Sidekick 1.8L

Download the full database via torrent (~1.1 TB)

Disconnect ignitor harness connectors and remove ignitor. Using DVOM, connect leads to ignitor and check for continuity between specified terminals of corresponding cylinders. See IGNITOR CONTINUITY table. See Fig 1 . Replace ignitor if continuity is not as specified.

IGNITOR CONTINUITY

Positive Lead

Negative Lead

Continuity

⁽¹⁾ Yes

⁽¹⁾	Ohmmeter reading should be other than zero or infinity.

Fig 1: Testing Ignitor (Sidekick 1.8L)

Courtesy of SUZUKI OF AMERICA CORP.